Waterjet Cutting Prices 2025
Written by Brian B

Waterjet Cutting – How Much Does This Cost?

Having to cut or sever materials in mass sounds very expensive. But, it’s actually much more affordable than made out to be! General waterjet cutting operating costs average around $15-$30 an hour.

Waterjet Cutting Process

A waterject cutter is a tool used to slice metal. The actual cutting works through a high velocity stream and pressure of water. Waterjet cutting is the process of leveraging computer numerical control (CNCs) systems. This means the waterjets are powered with special software and a system of controls made to match the exact result for the final intended product.

If the company you are working with is provided enough information on the ideal product, then a quote will be initiated and given the final product for development. How extensive the project/cutting is will determine your rate of pay. 

Here’s a list of some small factors that can add into the rate in which you pay for waterjet cutting.

  • Tolerance levels
  • If hazardous waste will need to be disposed of after cutting is performed
  • Level of density of material being worked on
  • Material type worked on

On top of these examples of waterjet cutting, there are also operating fees that will need to be settled. 

Prices Associated With Waterjet Cutting

It’s no secret that waterjet cutting machines are extremely pricey to operate and maintain. As mentioned before, when you need to use a waterjet cutting system you will have to pay for other expenses than just borrowing the machine for some time.

Below is a small list of expenses cutting companies tend to factor into your quote.

  • The type of waterjet cutting system
  • Time using the machine
  • Flow of garnet rate
  • The programming of the machine and the data entry
  • Costs of having to replace worn out parts
  • Abrasive costs
  • The price to power the machine
  • How much water is used during this process

The prices of utilities and maintenance combined can be factored into the total cost for the waterjet cutting services.

In comparison to other methods of cutting, waterjet cutting has a seamless finish to the product. Plus, comparatively speaking, it is very affordable.

If you have any questions or need any further assistance with waterjet cutting services, we are more than happy to help! Contact East Valley Precision today with any questions that you have.

Water Jet Cutting Services

East Valley Precision offers water jet cutting services near Phoenix & Chandler, Arizona. Contact East Valley Precision today!

Water Jet Cutting Process
Written by webtechs

Water Jet Cutting Process

If you are wondering how the water jet cutting process works, this post should help! The water jet cutting process includes:

Water jet cutting begins with the intensifier pump. The intensifier pump creates high pressure water (up to 90,000 psi) needed for cutting solid materials like metal. The pump utilizes a hydraulic pressure over water system. A large motor drives the pump, creating pressure which powers the piston into a cylinder.

1. Water Input

The low pressure water input pulls water through a high pressure tube

2. Boost pump.

Pumps the water

3. Inlet filter.

The water is forced through the inlet water filter

4. Inlet check valves.

Then the water is forced through the inlet check valves into the intensifier

5. Pressure.

The hydraulic pump pressurizes the fluid and switches between the 2 sides of the piston. The pressure is created with the hydraulic piston which also creates pressure on the water in the intensifier. The pressure is maximized by the larger cylinder pushing a small piston into a water filled cylinder.

6. Accumulator.

Then the high pressured water flows into the accumulator. The accumulator smoothes out any pressure ripples.

7. Cutting head.

The water then flows through the high pressure tubing into the cutting head; The off valve controls the flow of water in the cutting head. this allows the CNC machine to stop and start the process at the right time.

8. Orifice.

The pressurized water is applied to an orifice (defines & creates water streams used to cut through material). The water is mixed with abrasive as it exits the orifice for cutting harder materials.

9. Abrasive.

The garnet abrasive is mixed with the water inside the mixing chamber. The flow of abrasive can be controlled by using the abrasive metering system. When cutting hard material the abrasive is what actually does the cutting.

Water Jet Cutting Services

East Valley Precision offers water jet cutting services near Phoenix & Chandler, Arizona.

1 2